|
|
|
 Water Slides |
Anchors & Flanges
|
 DECK-MOUNTED
ANCHOR FLANGE
APPLICATION
This is a machined aluminum anchor flange suitable for use in surface (deck)
mounting a variety of equipment including slides, ladders, handrails and
stair rails on light to moderate duty residential and light duty commercial
installations in most geographic areas.
STANDARD FEATURES
The .3" (7.9mm) thick. machined aluminum Anchor Flange Assembly provides a
suitable mounting point when surface mounting light to moderate duty
residential and light duty commercial equipment whose outer diameter tubing
is 1.9" (48.3mm). The 3.25" (82.6mm) deep mounting tube provides a
substantial mounting sleeve while the 5.25" (133.4mm) diameter base provides
a stable platform. The base is symmetrically predrilled to accept four
mounting bolts of a diameter of 1/4" (.25"/6.4mm) (not included). In
addition, either side of the mounting tube is predrilled at approximately 1"
(25.4mm) below the top of the mounting tube. Mounting of equipment is
accomplished by properly aligning these holes with matching holes in
equipment and securing with a 2.75" (69.9mm) long bolt. This carbon steel
bolt, a bushing, two washers and a lock nut (U.S. thread) are included with
the anchor socket. This unit is individually packaged for single unit sales.
|
|
|
 PLASTIC DECK-MOUNTED ANCHOR FLANGE
STANDARD FEATURES
The Plastic Anchor Flange Assembly provides a suitable mounting
point when surface mounting light duty residential equipment whose outer
diameter tubing is 1.9" (48.3mm). The base is symmetrically predrilled
to accept four mounting bolts.
|
|
|
| |
|
|
|
