| |
|
| |
|
Above Ground Pool Solar Cover Reel |
|
|
| |
|
Please Click Here for an Image Gallery
|
To remove and store your cover, you simply pull the cover off the pool side and it lays in the holders, folded accordion style. Use is like pulling sheets off the end of your bed. Now your cover is stored.. To put the cover on, just reverse the process. This can be done while you are in the pool, reach over the pool side grasp the cover and back up, or from outside the pool by starting the leading end over the pool edge, grasp the cover and walk along the pool side pulling the cover on as you go. Always use a protective cover to extend the life of your solar cover!
- EZ on EZ off system, one person, in minutes
- Save money, time and enjoy convenience
- Easier and quicker to use than solar reel
- Helps keep swimming pool clean
- Your solar cover is stored out of the way
- More economical than a reel type holder
- Holds the largest sizes and shapes of covers
- Extend solar cover life
- Quick release and removal
|
|
|
|
|
|
|
|
|
| General Mounting Directions and Comments: |
| A Solar Saddle set includes five saddles and all required mounting hardware for both metal and vinyl top rails. The key to mounting the Solar Saddle product is to evenly space the saddles to allow 2 1/2 to 3 feet of the cover to extend over/past the outside saddles, as the picture below shows. Sound simple, it is. The mounting project can be completed in less than 20 minutes. Your leasure and pool enjoyment time will increase. Solar Saddle is the first product designed for one-step cover removal and out of the way storage. If you are really in a hurry, a cover can be replaced or removed and stored in 3 to 4 minutes, by one person! No other product can perform like that. How can a statement like that be made? Many Customers tell us they have purchased a Solar Saddle set who already had reels. They stopped using their reels. That's a strong statement for the efficiency of the Solar Saddle product. Remove and store your cover in one-step. Solar Saddle was designed to make your life easier. Easy to install, efficient to use, and affordable. |
| HOW TO USE YOUR SOLAR SADDLE |
| To store your cover, you simply remove the cover as if you were placing it on the ground, but instead, you lay it in the saddles. That is it, you are done in one step! The cover is now off the pool and stored out of the way. If it has been placed at the far end of the pool the cover may be out of sight from your deck view. A description of how to remove the cover is just like taking sheets off the end of your bed. With the cover placed in the saddles it is also in a ready position to be placed back on the pool. To put the cover on, just reverse the process. This can be done while you are in the pool, reach over the pool side grasp the cover and back up, or from outside the pool by starting the leading end of the cover over the pool edge, grasp the cover and walk along the pool side putting the cover on as you go. Always use a protective cover to extend the life of your solar cover! |
| The graphics below show the Solar Saddle brackets and saddles mounted under the top rail, outside of the pool. Followed by mounting instructions. |
 |
| The picture above is an image of what you would see if you were on the outside of the pool and looking at the bracket mounted under the top rail from the front of the pool. What is shown from the top down are the bolts going down through the toprail then the bracket and the nuts placed on the bolts. Next the Solar Saddle is placed in the bracket and the mounting pin is place through the bracket and the saddle completeing the mounting of the bracket to the pool and the Solar Saddle to the bracket. |
| |
 |
| The picture above is an image of what you would see if you were on the outside of the pool and looking at the bracket mounted under the top rail from the side. What is shown from the top down are the bolts going down through the toprail then the bracket and the nuts placed on the bolts. Next the Solar Saddle is placed in the bracket and the mounting pin place through the bracket and the saddle. This completes the mounting of the bracket to the pool and the Solar Saddle mounted to the bracket. |
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
